The Steel Panel Lockout is a circuit breaker lockout tagout device. It lockouts out the entire panel. Two of the panel screws are encapsulated by the device preventing the removal of the panel cover. The Steel Panel Lockout is designed to help prevent vandal from accessing the electrical panel. Do not use near live open panels.
For panels 17 inches to 30 inches wide. Made in the USA.
Includes a polished brass padlock and reusable tagout.
Extensions not used with Steel Panel Lockout.
May have lead time for delivery.
Do not use near open electrical panels. Made in the USA. Lock imported.
Purchasing without locks and tags
To purchase without locks and tags for a price reduction of $3.50 per Steel Panel Lockout, please call or email us. Your lock must have a long shaft that is less than 1/4 inch thick. however, you can place a Master #417 Lockout hasp on the Steel Panel Lockout and use any lock that has a shank 5/16 inch or less.
Advantages of using the Steel Panel Lockout during Construction
During construction wires are pulled, but not terminated, into a live panel. These terminations are not made until the field side of the wire can be completed. This leaves the wire exposed to vandals. With a Steel Panel Lockout the copper wire can be terminated into the live panel and then the panel can be locked. This protects the wire and the work that would be needed to replace it if it was vandalized. Locking out the panel also prevents an incomplete wire from becoming live in the field. Another advantage to completing the terminations in the electrical panel is that deadlines can be more easily met. The electric closets often become a bottleneck in the last days of a project when all the terminations need to be completed. Finally, there is no searching for trims and panel covers for the electrical panels because the panels are already completed.